|
|
A New TRACE MODE SCADA/HMI Based Control System Launced on the Europe Biggest Blast Furnace Severyanka (Severstal)
|
In the end of 2003, a control system for monitoring a near-furnace slag granulation plant was commissioned on the Severyanka (OJSC Severstal) blast furnace No. 5, the biggest blast furnace in the world, which performs monitoring of the granulation process for a blast furnace product. The control system has been developed on the basis of TRACE MODE SCADA and ADAM 5000Е controllers (Advantech).
With implementing a system based on TRACE MODE SCADA, it has become possible to refuse instrumentation and control disk recording devices and an opportunity has appeared to monitor the operation of both granulation plants from any operator's control desk as well as from a granulation foreman's office.
The control system has allowed to detect bottlenecks in the operation of equipment, reduce the equipment operation in idle conditions to a minimum. |
|
The Biggest Chinese Metal Plant Chose TRACE MODE SCADA/HMI
|
 Baoshan Iron & Steel Plant is the biggest metal plant in China. In January 2004, a SCADA/HMI and softlogic process control system for air and oil supply to the rolling mill was successfully launched in the steel-rolling shop of Plant No. 3. The system has been developed by engineers of Silian Corporation, the biggest state instrument-making Chinese corporation.
The process control system has been made in the SoftDCS architecture. It is based on FCS-2000 redundant PC-based controllers under control of Micro TRACE MODE softlogic software, remote I/O cards and TRACE MODE SCADA/HMI. According to an OEM-agreement signed with AdAstra, Silian supplies the FCS-2000 controller with TRACE MODE SCADA/HMI and softlogic software. |
|
Severstal OJSC's Mpcs Based On TRACE MODE Has Been Repaidfor 20 Days!
|
 Basing on TRACE MODE 5 and Lomicont TM controllers, Severstal OJSC's specialists have implemented a management system for the agglomeration process at their enterprise. A task of the agglomeration process is to prepare high-quality raw materials for the blast-furnace production from an iron-ore concentrate mixture, circulating products, blast-furnace dust, scale, other iron-containing materials by their agglomeration with the required amount of flux, with the use of coke fines as a fuel.
Upon implementing the control system, the amount of coke being used has reduced by 52%. The annual economic effect has amounted to $200 000 dollars. The repayment period is 20 days. The development has taken 5 man-months. |
|
|
|
The New TRACE MODE SCADA/HMI Release 6.10.2 Available For Download 
AdAstra Research Group, Ltd (Moscow, Russia) has announced a new release of integrated SCADA- and SOFTLOGIC- system TRACE MODE 6.10.2.
The release is now available for all registered users of TRACE MODE 6 SCADA/HMI for free (it is free for download from the User's Personal Account).
In accordance to increased security requirements of unauthorized access and user authentification in the process control software, new means of user rights management have been introduced. In the 6.10.2 some new features added, bugs detected fixed.
The new release 6.10.2 offers new software products and some improved features ...... |
|
TRACE MODE SCADA/HMI Controls Kudankulam Nuclear Power Plant Fire Safety System  SKB Tensor company (Russia, Moscow region) has developed and successfully commissioned an automated fire safety system for units №1 and №2 of Kudankulam Nuclear Power Plant, India (Tamil Nadu).
The automated fire safety system for units №1 and №2 of Kudankulam nuclear power plant, India runs under control of TRACE MODE SCADA/HMI (AdAstrA, Russia).
TRACE MODE SCADA/HMI performs the following functions ...
|
|
DPTA Corp is TRACE MODE SCADA/HMI Software Dealer In Ho Chi Minh City (Viet Nam)  The Ho Chi Minh City based (Viet Nam) Duc Phong Technology and Automation Corporation (DPTA) has the status of AdAstrA Authorized Dealer. The corporatin has the experience and qualifications to sales and customer support for TRACE MODE SCADA/HMI software.
 TECHNOLOGY CORPORATION AND GERMAN STYLE AUTO was established in 2006, with a team of professionals, engineers, management staff are formally trained, motivated and experienced customers always trust.
|
|
TRACE MODE SCADA/HMI Controls Ventilation in a Riga Commercial and Office Center  A Riga city based Sia Rameda company (Riga , Latvia) has used russian made TRACE MODE SCADA/HMI software to develop a control system for ventilation, heating and cooling equipment in the RD Holding commercial and office center in Riga (street Maskavas 240, Riga , Latvia).
The main purpose of the work is to connect all ventilation machines, chillers and heating units to a centralized computer, supervisory control system to ensure round the clock equipment monitoring from a single center.
The Sia Rameda engineers have replaced an old .... |
|
Training Video: Connecting Mitsubishi FX3U PLC to TRACE MODE SCADA/HMI via Melsec Protocol  Learn how to connect a Mitsubishi Melsec FX3U PLC to TRACE MODE SCADA/HMI through built-in driver with our new free online video training.
To run the film just ....
|
|
SCADA TRACE MODE In Process Control of The Biggest European Oil Shale Chemical Company 
Viru RMT Ou (Estonia, EU), Authorized System Integrator of AdAstrA Research Group fulfilled reconstruction of control system for the 1000 tones gas generator retort at the main technological process of VKG oil shale company.
VKG Oil is the biggest oil shale chemical industry in Europe, the main field of activity of which is thermal processing of oil shale. 1.4 million tons oil shale is reprocessed per year. The company produces various fuel oils, which are characterized by low viscosity and a setting point below -25ºC, oil coke and pitch, summary oil shale phenols, antiseptic wood impregnation oil and bitumen.
The return of investment in reconstruction of SCADA TRACE MODE based gas generator control system was achieved within... |
|
|
Teknofeed Uses TRACE MODE HMI in Fodder Additives Plant Batching Control  A Belgorod based AIT company (South of Russia) has successfully used TRACE MODE SCADA/HMI software to develop and to implement a batch control system for manufacturing of fodder additives. The control system has been installed in facility of TeknoFeed (Tshebekino, Belgorod area, Russia).
The main task of the TeknoFeed control system consists in the most precise batch dosing of fodder additives. The control system maximizes batch dosing accuracy of loose and liquid components (acids) according recipes.
The TeknoFeed batch control system includes ... |
|
TRACE MODE SCADA/HMI In Control of The Biogas Fuel Production Plant in Poland  The Test company (Poland) used the TRACE MODE SCADA/HMI software to build the control system for the plant of biogas fuel production from the sewerage - Elbląskie Przedsiębiorstwo Wodociągów i Kanalizacji w Elblągu Sp. z o.o., situated in Elblag city in north-eastern Poland.
The Elblag city is a Polish leader in energy production from renewable sources, including biogas and biomass.
According to the developers of biofuel production systems, the use of SCADA TRACE MODE has reduced the overall cost of the project in two-three times (compared to the same level SCADA software).
The system monitors the following values ... |
|
Adastra Releases TRACE MODE 6 RTM for Linux  AdAstra Company (Russia) announced the release of real-time monitor (LinRTM) for the operating system Linux.
TRACE MODE RTM is the main runtime module of the integrated TRACE MODE 6 SCADA/HMI software, designed to operate on operator workstations.
The new LinRTM provides ...
|
|
The Brodsky Refinery (Bosnia) Implements TRACE MODE SCADA/HMI for EURO 5 Gasoline Production  In Bosnia, the Bosanski Brod refinery launched a second production line, which was repaired by the Russian company Zarubezhneft. Now the plant is able to produce the gasoline conforming to the Euro 5 standard.
The operator control systems for the gasoline production at the Bosanski Brod refinery were developped and implemented by several Russian system integrators. All integrators used Russian SCADA-software TRACE MODE 6 (AdAstra Research Group, Moscow) for process control of gasoline production.
New Brodsky refinery control system consists of the following parts ... |
|
A New Free Driver for OMRON Sysmac PLC  AdAstra Research Group (Moscow, Russia) has released a new version of the free TRACE MODE SCADA/HMI driver for the OMRON programmable logical controller. The new driver is built in the TRACE MODE SCADA/HMI 6.09 release and above.
A video tutorial demonstrating the technology of OMRON PLCs connecting over the network via UDP using the free built-in driver, is available.
The new driver is much faster, easier and more functional than the previous ones. The new TRACE MODE OMRON PLC driver has the following important features... |
|
TRACE MODE 6 SCADA/HMI In Control Of City Water Supply Utilities  The Iron–Technik company (Ust -Kamenogorsk, Kazakhstan), an AdAstra authorized system integrator, has launched into commercial operation an automation system for municipal public utility named "Oskemen" (Ust -Kamenogorsk, Kazakhstan ).
The new control system is build with TRACE MODE SCADA/HMI software and embraces 14 plants of the "Oskemen water utility" enterprise, e.g... |
|
|
|
