TRACE MODE SCADA/HMI In Control of The Biogas Fuel Production Plant in Poland

The Test company (Poland) used the TRACE MODE SCADA/HMI software to build the control system for the plant of biogas fuel production from the sewerage - Elbląskie Przedsiębiorstwo Wodociągów i Kanalizacji w Elblągu Sp. z o.o., situated in Elblag city in north-eastern Poland.

The Elblag city is a Polish leader in energy production from renewable sources, including biogas and biomass.

According to the developers of biofuel production systems, the use of SCADA TRACE MODE has reduced the overall cost of the project in two-three times (compared to the same level SCADA software). 

The system monitors the following values ...

SCADA TRACE MODE In Process Control of The Biggest European Oil Shale Chemical Company

Viru RMT Ou (Estonia, EU), Authorized System Integrator of AdAstrA Research Group fulfilled reconstruction of control system for the 1000 tones gas generator retort at the main technological process of VKG oil shale company.

VKG Oil is the biggest oil shale chemical industry in Europe, the main field of activity of which is thermal processing of oil shale. 1.4 million tons oil shale is reprocessed per year. The company produces various fuel oils, which are characterized by low viscosity and a setting point below -25ºC, oil coke and pitch, summary oil shale phenols, antiseptic wood impregnation oil and bitumen.

The return of investment in reconstruction of SCADA TRACE MODE based gas generator control system was achieved within...

TRACE MODE SCADA Employed in Automated Control System for 2nd Power Unit at Krasnodar Heat and Power Plant

The Krasnodar heat and power plant launched an automated control system for the 2nd power unit that was developed using SCADA TRACE MODE system and the RK-131/300M controllers.

Within the shortest time-frame, a team of four engineers from Yuzhniy Engineering Power Center, YugOGRES, successfully deployed the control system during overhaul at the 2nd power unit.

SCADA TRACE MODE and I8000 in Control of Chinese Heat Networks

China-based Shi Jian Zhuang O-SUN Automation Instrument Co. LTD has deployed a billing and control system for the heat networks at Xan-Dan city of Xai Bei province (China) using integrated TRACE MODE SOFTLOGIC and SCADA-system from AdAstrA, the Russian software developer.

The control system uses OSD-LEF3000 heat meters (China) and i8000 controllers (ICP/DAS, Taiwan).

The New 25 MW Gas-Engine Heat and Power Plant at Chukotka Running Under TRACE MODE 6 SCADA/HMI

Belelektromontazhnaladka company team has successfully implemented the control system of the gas-engine heat and power plant in Anadyr city (Extreme Nord of Russia). The total power capacity of the gas-engine heat and power plant is 25 MW.

At the operator level of new control system, TRACE MODE SCADA/HMI software is used, while Mitsubishi Electric controllers are used at the hardware level. The control system covers the heat and power processes of the heat and power station and enables control over power supply, ventilation, heating, domestic and hot water supply, water conditioning, heat recovery, fire safety and the fuel and lubricant warehouse.

Nestle Сonfectionery Launches TRACE MODE 6 SCADA/HMI Based Control System

The Nestle "Altay" confectionery (Barnaul city, Russia) has finished setup works for the heat and water supply shop control system. The new system is fully developed by the factory engineers in the TRACE MODE 6 SCADA/HMI development system.

800 MWt Power Unit at Talimardjan Power Plant Launched under TRACE MODE SCADA/HMI Control

ZAO PIK ZEBRA (Moscow, Russia) the AdAstrA's system partner has completed development and successfully implemented control system for the power unit 1 (800 MWt) at Talimardjan heat power plant (Uzbekistan). The control system is based on KRUIZ DCS and SOFTLOGIC and HMI software TRACE MODE.

The Integrated SCADA And SOFTLOGIC TRACE MODE Technologies in Boiler-House Control

Tecon-Engineering company (Russia), developed a distributed PC-based control system (SCADA & SOFTLOGIC) for fifteen boilers in Archangelsk Region.

The project is based on 18 Teconic controllers with the Micro TRACE MODE SOFTLOGIC OEM software and SCADA TRACE MODE operator interface. 

TRACE MODE In Control of The Tyumen Combined Cycle Power Plant -1

The new 220 MW combined cycle plant was launched at the Tyumen Heating Plant (HP) -1. The power plant built at the Tyumen HP-1 is the second biggest combined cycle unit in Russia. The newest combined cycle technology used in the project will allow to reduce the specific fuel consumption for the generation of electricity on the whole at the Tyumen HP-1 by 12%, improve the efficiency and decrease the number of hazardous emissions into the atmosphere by 2.5-3 times (for NOx). 

The combined cycle plant control system has been developed by PIK ZEBRA company on the basis of the integrated SCADA/HMI and SOFTLOGIC-system TRACE MODE and includes more than 20 operator workstations and more than 20 KRUIZ controller operating under the control of Micro TRACE MODE.