|
|
A New TRACE MODE SCADA/HMI Based Control System Launced on the Europe Biggest Blast Furnace Severyanka (Severstal)
|
In the end of 2003, a control system for monitoring a near-furnace slag granulation plant was commissioned on the Severyanka (OJSC Severstal) blast furnace No. 5, the biggest blast furnace in the world, which performs monitoring of the granulation process for a blast furnace product. The control system has been developed on the basis of TRACE MODE SCADA and ADAM 5000Е controllers (Advantech).
With implementing a system based on TRACE MODE SCADA, it has become possible to refuse instrumentation and control disk recording devices and an opportunity has appeared to monitor the operation of both granulation plants from any operator's control desk as well as from a granulation foreman's office.
The control system has allowed to detect bottlenecks in the operation of equipment, reduce the equipment operation in idle conditions to a minimum. |
|
The Biggest Chinese Metal Plant Chose TRACE MODE SCADA/HMI
|
 Baoshan Iron & Steel Plant is the biggest metal plant in China. In January 2004, a SCADA/HMI and softlogic process control system for air and oil supply to the rolling mill was successfully launched in the steel-rolling shop of Plant No. 3. The system has been developed by engineers of Silian Corporation, the biggest state instrument-making Chinese corporation.
The process control system has been made in the SoftDCS architecture. It is based on FCS-2000 redundant PC-based controllers under control of Micro TRACE MODE softlogic software, remote I/O cards and TRACE MODE SCADA/HMI. According to an OEM-agreement signed with AdAstra, Silian supplies the FCS-2000 controller with TRACE MODE SCADA/HMI and softlogic software. |
|
Severstal OJSC's Mpcs Based On TRACE MODE Has Been Repaidfor 20 Days!
|
 Basing on TRACE MODE 5 and Lomicont TM controllers, Severstal OJSC's specialists have implemented a management system for the agglomeration process at their enterprise. A task of the agglomeration process is to prepare high-quality raw materials for the blast-furnace production from an iron-ore concentrate mixture, circulating products, blast-furnace dust, scale, other iron-containing materials by their agglomeration with the required amount of flux, with the use of coke fines as a fuel.
Upon implementing the control system, the amount of coke being used has reduced by 52%. The annual economic effect has amounted to $200 000 dollars. The repayment period is 20 days. The development has taken 5 man-months. |
|
|
|
TRACE MODE SCADA/HMI Controls Kudankulam Nuclear Power Plant Fire Safety System  SKB Tensor company (Russia, Moscow region) has developed and successfully commissioned an automated fire safety system for units №1 and №2 of Kudankulam Nuclear Power Plant, India (Tamil Nadu).
The automated fire safety system for units №1 and №2 of Kudankulam nuclear power plant, India runs under control of TRACE MODE SCADA/HMI (AdAstrA, Russia).
TRACE MODE SCADA/HMI performs the following functions ...
|
|
TRACE MODE SCADA/HMI Controls Ventilation in a Riga Commercial and Office Center  A Riga city based Sia Rameda company (Riga , Latvia) has used russian made TRACE MODE SCADA/HMI software to develop a control system for ventilation, heating and cooling equipment in the RD Holding commercial and office center in Riga (street Maskavas 240, Riga , Latvia).
The main purpose of the work is to connect all ventilation machines, chillers and heating units to a centralized computer, supervisory control system to ensure round the clock equipment monitoring from a single center.
The Sia Rameda engineers have replaced an old .... |
|
SCADA TRACE MODE In Process Control of The Biggest European Oil Shale Chemical Company 
Viru RMT Ou (Estonia, EU), Authorized System Integrator of AdAstrA Research Group fulfilled reconstruction of control system for the 1000 tones gas generator retort at the main technological process of VKG oil shale company.
VKG Oil is the biggest oil shale chemical industry in Europe, the main field of activity of which is thermal processing of oil shale. 1.4 million tons oil shale is reprocessed per year. The company produces various fuel oils, which are characterized by low viscosity and a setting point below -25ºC, oil coke and pitch, summary oil shale phenols, antiseptic wood impregnation oil and bitumen.
The return of investment in reconstruction of SCADA TRACE MODE based gas generator control system was achieved within... |
|
Intel Chooses TRACE MODE SCADA/HMI for Office Building Automation  Protect Company deploys a TRACE MODE 6 SCADA/HMI based building management system across Intel's new office building.
Covering all of Intel's high-tech office, this advanced automation system is in charge of the main and redundant power supply, uninterruptible power supply, sewerage, leakage control, fire retarding valves and smoke removal, climate.
The dispatcher control system builds upon hardware from Advantech, Sauter and S+S Regeltechnik, Jola, York, SAT 4TM power meters, and Schneider Electric frequency converters.
|
|
SCADA TRACE MODE 6 in Control System of European Nuclear Power Plants 
A Moscow-based SNIIP-SISTEMATOM company has set up an automated system to control the neutron current in the reactors of the 3rd and 4th power units at Bogunitse nuclear power plant (Slovakia). The new control system has been developed using Russian made SCADA/HMI software TRACE MODE 6.
A similar control system has been also developed for Mokhovtse nuclear power plant (Slovakia). |
|
SCADA HMI TRACE MODE 6 in PARK HOUSE Mall Automation  Nationwide retail group PARK HOUSE has selected SCADA HMI TRACE MODE 6 for use in their building automation systems.
EngineerMarket company (Samara City) has commissioned the control systems of two PARK HOUSE malls in Yekaterinburg and Tolyatti Cities.
|
|
|
Teknofeed Uses TRACE MODE HMI in Fodder Additives Plant Batching Control  A Belgorod based AIT company (South of Russia) has successfully used TRACE MODE SCADA/HMI software to develop and to implement a batch control system for manufacturing of fodder additives. The control system has been installed in facility of TeknoFeed (Tshebekino, Belgorod area, Russia).
The main task of the TeknoFeed control system consists in the most precise batch dosing of fodder additives. The control system maximizes batch dosing accuracy of loose and liquid components (acids) according recipes.
The TeknoFeed batch control system includes ... |
|
TRACE MODE SCADA/HMI In Control of The Biogas Fuel Production Plant in Poland  The Test company (Poland) used the TRACE MODE SCADA/HMI software to build the control system for the plant of biogas fuel production from the sewerage - Elbląskie Przedsiębiorstwo Wodociągów i Kanalizacji w Elblągu Sp. z o.o., situated in Elblag city in north-eastern Poland.
The Elblag city is a Polish leader in energy production from renewable sources, including biogas and biomass.
According to the developers of biofuel production systems, the use of SCADA TRACE MODE has reduced the overall cost of the project in two-three times (compared to the same level SCADA software).
The system monitors the following values ... |
|
The Brodsky Refinery (Bosnia) Implements TRACE MODE SCADA/HMI for EURO 5 Gasoline Production  In Bosnia, the Bosanski Brod refinery launched a second production line, which was repaired by the Russian company Zarubezhneft. Now the plant is able to produce the gasoline conforming to the Euro 5 standard.
The operator control systems for the gasoline production at the Bosanski Brod refinery were developped and implemented by several Russian system integrators. All integrators used Russian SCADA-software TRACE MODE 6 (AdAstra Research Group, Moscow) for process control of gasoline production.
New Brodsky refinery control system consists of the following parts ... |
|
TRACE MODE 6 SCADA/HMI In Control Of City Water Supply Utilities  The Iron–Technik company (Ust -Kamenogorsk, Kazakhstan), an AdAstra authorized system integrator, has launched into commercial operation an automation system for municipal public utility named "Oskemen" (Ust -Kamenogorsk, Kazakhstan ).
The new control system is build with TRACE MODE SCADA/HMI software and embraces 14 plants of the "Oskemen water utility" enterprise, e.g... |
|
Pakistan Students Study Industrial Automation Technologies with SCADA TRACE MODE  A new laboratory practice on Supervisory control and Data Acquisition (SCADA) and Human Machine Interface (HMI) system development is launched for undergraduate students of Electrical Engineering at University of Engineering and Technology, Taxila (Punjab, Pakistan). University of Engineering and Technology, Taxila commonly referred to as UET Taxila is among the best engineering universities in Pakistan. The new practice is based on the TRACE MODE SCADA/HMI software.
The laboratory work was developed by Director Technical, Creative Electronics & Automation in his MSc Research work under the supervision of Prof. Dr. Muhammad Ahmad Choudhry using the Omron's latest CJ1 Programmable Logic Controller (PLC), the Device-Net field bus and the latest version of TRACE MODE 6 SCADA/HMI software.
The author can share the experiments the files of SCADA as well as PLC and complete Experimentation & Training documentation. Please contact ... |
|
TRACE MODE SCADA/HMI Controls Peat Product Production in Poland  The Elblag city based Test company (Poland) launched a process control system for the production line of peat products at the „Rucianka” factory belonging to Hollas Sp. z o.o. company - the Poland's biggest peat products manufacturer.
The new control system was developed using TRACE MODE software and Advantech ADAM IO modules. It has been implemented in FBD programming language, it includes... |
|
|
|
