HOME

ABOUT US

PRODUCTS

SUPPORT

PARTNERS

SUPPORT

New free of charge drivers for TOSHIBA TOSVERT Added in TRACE MODE SCADA/HMI

New free of charge drivers for TOSHIBA TOSVERT series frequency converters are added to the TRACE MODE SCADA/HMI software and published at the AdAstra Web site for download:

TOSVERT.VF-nC1
TOSVERT.VF-S9
TOSVERT.VF-P7

via RS485/RS232C interfaces.

A frequency converter (inverter) is an integral part of the frequency regulated electric driver and is used for electric motor control. Modern frequency converters allow to implement complicated control algorithms, perform motor protection, adjust the efficiency, optimize operating conditions depending upon load and perform other functions. Now these capabilities become accessible for TRACE MODE SCADA users.

TRACE MODE SCADA/HMI (unlike other HMI softwares) features a huge library of free controller drivers covering about 2812 devices . The use of commercial drivers or OPC-servers normally makes a SCADA project more expensive by $300-800 whereas the TRACE MODE SCADA/HMI drivers are provided to the user free of charge.

Actually TRACE MODE supports PLCs produced by best world manufactures: Siemens Simatic S5 and S7, Allen Bradley, Schneider Electric, GE Fanuc, Advantech ADAM, ICP/DAS i7000 and i8000, OMRON, Mitsubishi as well as PLCs made by leading Russian manufacturers: Techonic, Lomicont, Remicont, KR-300, Sh9327, etc.

TRACE MODE SCADA/HMI users can download the new drivers at the "Technical Support" section of the Web site www.tracemode.com.

A New Free Driver for OMRON Sysmac PLC

omron plc AdAstra Research Group (Moscow, Russia) has released a new version of the free TRACE MODE SCADA/HMI driver for the OMRON programmable logical controller. The new driver is built in the TRACE MODE SCADA/HMI 6.09 release and above.

A video tutorial demonstrating the technology of OMRON PLCs connecting over the network via UDP using the free built-in driver, is available. OMRON Logo

The new driver is much faster, easier and more functional than the previous ones. The new TRACE MODE OMRON PLC driver has the following important features...

HART Driver for Micro TRACE MODE 6 to Connect HART Devices and WinCon 8000

AdAstrA Research Group, Ltd made available an external driver for Micro TRACE MODE 6 industrial controller programming system. This driver is designed to connect WinCon 8000 controller to sensors and flowmeters using a popular HART protocol.

The Kristall distillery in Moscow was one of the first factories to deploy the HART driver for WinCon 8000. Previously, Micro TRACE MODE 6 for WinCon 8000 was shipped only with the integrated drivers for Modbus RTU, Modbus TCP, DCS, etc.

SCADA HMI TRACE MODE Supports BACnet Protocol

BACnet

The BACnet protocol support strengthen the SCADA TRACE MODE 6 positions in the field of building automation and hi-tech house applications.

The ready-to-use example of the SCADA TRACE MODE 6 connectivity to the YORK TDC9E PLC using BACnet/IP protocol is available for free download at the SUPPORT section of the site.

New Release of TRACE MODE 5.15 Will Be Issued in May

New 15th release of the integrated SCADA- and SOFTLOGIC-system TRACE MODE 5 will be issued by AdAstrA on 14th May 2004.

In the release, a GSM-Activator has been updated and the following elements have been added:

- DSR signal control disabling (to operate with non-standard COM-ports).

- support of modems operating only in the GSM phase 2+ specification (GSM-modems of the latest generation).

In addition, Release 5.15 will contain new free drivers.

Free Drivers for Ge Fanuc 9030 Series

Adastra technical support announces the relaese of the new free driver for the PLC's GE Fanuc 9030 Series. The new driver will be included in TRACE MODE 5.11. Now the driver is available free in the section Support!

Free Drivers for Siemens And Allen-Bradley PLC

Adastra technical support announces the relaese of new built-in drivers.

TOP NEWS

The New TRACE MODE SCADA/HMI Release 6.10.2 Available For Download

AdAstra Research Group, Ltd (Moscow, Russia) has announced a new release of integrated SCADA- and SOFTLOGIC- system TRACE MODE 6.10.2.

The release is now available for all registered users of TRACE MODE 6 SCADA/HMI for free (it is free for download from the User's Personal Account).

In accordance to increased security requirements of unauthorized access and user authentification in the process control software, new means of user rights management have been introduced. In the 6.10.2 some new features added, bugs detected fixed.

The new release 6.10.2 offers new software products and some improved features ......

Training Video: Connecting Mitsubishi FX3U PLC to TRACE MODE SCADA/HMI via Melsec Protocol

Melsec FX3U and SCADA/HMI TRACE MODE Learn how to connect a Mitsubishi Melsec FX3U PLC to TRACE MODE SCADA/HMI through built-in driver with our new free online video training.

To run the film just ....

SCADA For GSM/GPRS-based Remote Control Now Released

Doc GSM RTM+ TRACE MODE

AdAstrA Research Group (Moscow, Russia) has launched a new SCADA/HMI class software product - TRACE MODE GSM RTM+ for GSM/GPRS-based remote control and alarming.

Utility, transportation, hi-tech house, water, gaz, fire-safety and agriculture remote control – the all-new SCADA/HMI software is designed for a range of applications that seek to receive real-time process data and communicate them to the mobile teams in a fast and reliable way.

TRACE MODE GSM RTM+ is easily programmed on IEC 6-1131/3 visual languages in SCADA/HMI TRACE MODE 6 integrated development environment.

TRACE MODE Data Center Provides Remote Web Based And Mobile Access to Control Systems

AdAstrA Research Group has released a new SCADA TRACE MODE runtime module, TRACE MODE Data Center, providing remote access to real-time control system information using web-browser via Internet/Intranet or wireless networks (GSM, GPRS, Wi-Fi, Bluetooth).

The all-new product from AdAstra is tailored to meet the needs of the corporate users of TRACE MODE looking to consolidate information from the various control systems across the plant, and provide access to this information for mobile employees, such as engineers, chief engineers, and plant management.

SCADA TRACE MODE 6.05 Now Avaiable

On January 30, 2007, a new release of the integrated SCADA-system TRACE MODE 6.05 has been made available, both in Professional and Standard editions.

The 6.05 release includes new features and patches for the development system and runtime modules. The new SCADA TRACE MODE and MES-EAM-HRM software from the T-FACTORY system is available for free download from the support section.

SCADA HMI TRACE MODE Supports BACnet Protocol

BACnet

The BACnet protocol support strengthen the SCADA TRACE MODE 6 positions in the field of building automation and hi-tech house applications.

The ready-to-use example of the SCADA TRACE MODE 6 connectivity to the YORK TDC9E PLC using BACnet/IP protocol is available for free download at the SUPPORT section of the site.

LAST NEWS

Adastra Releases TRACE MODE 6 RTM for Linux

AdAstra Company (Russia) announced the release of real-time monitor (LinRTM) for the operating system Linux.

TRACE MODE RTM is the main runtime module of the integrated TRACE MODE 6 SCADA/HMI software, designed to operate on operator workstations.

The new LinRTM provides ...

A New Free Driver for OMRON Sysmac PLC

A video tutorial demonstrating the technology of OMRON PLCs connecting over the network via UDP using the free built-in driver, is available. OMRON Logo

The new driver is much faster, easier and more functional than the previous ones. The new TRACE MODE OMRON PLC driver has the following important features...

TRACE MODE 6.07.7 SCADA/HMI Now Released

AdAstrA's Technical Support team announces a new SCADA TRACE MODE 6.07.7 release.

The 6.07.7 release makes TRACE MODE 6 fully compatible with 32-bit and 64-bit versions of Windows 7, while also introducing exciting new features...

AdAstrA Releases TRACE MODE 6.07

AdAstrA Support team announces a new SCADA TRACE MODE 6.07 release.

TRACE MODE 6.07 features new development tools for electricity metering systems and building automation.

Starting with 6.07 release, SCADA TRACE MODE offers an all-in-one driver that supports a variety of protocols used in different electricity meters.

Besides new TRACE MODE 6.07 releas includes new graphical elements for building automation amd electricity metering systems.

AdAstrA Reseases a New Milestone Release, SCADA TRACE MODE 6.06!

AdAstrA launched a new release of the integrated SOFTLOGIC-SCADA-MES-EAM-HRM system, TRACE MODE 6.06, available both in Professional and Base editions. The exciting new 6.06 release provides a host of new features and technologies to dramatically increase SCADA TRACE MODE performance and functionality.

New SCADA TRACE MODE updates are available free of charge at the Support section.

HART Driver for Micro TRACE MODE 6 to Connect HART Devices and WinCon 8000